Filter
Top Products
8
EN
PREPARATION FOR USE
• Unplug the AC power cord from the AC socket before connecting or disconnecting any component.
Speaker Model
Name
System Name
Speaker connection
Connect each speaker wire to the SPEAKERS ter-
minals as shown. Use speakers with an impedance
of 6 ohms or more, as lower impedance speakers
can damage the unit.
Connect the black wire to the minus (-) terminal,
and the red wire to the plus (+) terminal.
Caution :
• Do not mix the right channel and left channel
wiring when connecting the speakers to the unit.
The right speaker is the one on the right side
when you are facing the front of the unit.
• Do not let bare speaker wires touch each other
as this may damage the amplifier and/or speak-
ers.
• Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
• Do not stand or sit on the speakers. If the speak-
ers fall or collapse, you may be injured.
XD-A75
XD-A55
LS-N70S
LS-N50S
Speakers (XD-A75, XD-A55)
Right speaker
Left speaker
Red
Black
Red
Black
CAUTION
Be sure to adhere the following, or proper
ventilation will be blocked causing damage
or fire hazard.
÷ Do not place any objects impairing heat
radiation onto the top of unit.