Kenwood XD-303 Stereo System User Manual


 
40
Application section
Selection of the recording type
With this unit, the following edit recording is
possible according to the purpose.
Convenient CD recording
Note that this cassette deck cannot record onto
Metal tapes.
Recording only desired titles
q
Perform this operation when a track you want to record
starts during CD playback. This starts recording of the
track from the beginning.
\
CD ONE TRACK RECORDING
If you want to select the track to be recorded while playing a CD
Recording of an entire CD
w
Perform the “CD DIRECT RECORDING” operation while
the CD player is in stop mode to start recording.
\
CD DIRECT RECORDING
If you want to record a CD in order of track numbers
Recording the programmed titles
e
Program the desired tracks from up to 3 CD discs in the
desired order and record the programmed playback onto
tape.
\
CD PROGRAM RECORDING
If you want to record only the desired tracks
Note
Note
Note
The recording will be interrupted for the part of the guide tape during both -side recording. To avoid the case like
this, please use single-side recording.
Note
Note
Note
Regarding CD-TEXT (Remote control unit only)
When a CD-TEXT disc is played on this unit, it dis-
plays the text information (disc or track title) re-
corded into the CD.
To switch the displayed text information between
the disc title and track title during playback, press
the TEXT DISP. key.
Scrolls the disc title display.
CD player’s time display.
Scrolls the track title display.
(When pressed during playback)
RDS DISP.
TEXT DISP.
Wiorld Mus
C2D01 1:1
NBew York: