Kenwood XD-303 Stereo System User Manual


 
30
Basic section
Tips in CD recording
When recording CD tracks onto a tape, if you leave
the cassette deck in record-pause mode beforehand,
the cassette deck recording can be started at the same
time as the CD starts to be played (synchronous re-
cording function).
1 Set the CD player in pause mode.
2 Select the track to be recorded with the skip
(4, ¢) keys.
(The CD player pauses at the beginning of
the selected track.)
3 Put the cassette deck in Record-pause mode.
(Press the REC/ARM key twice.)
4 Start playing the CD.
(Synchronous recording starts.)
÷ Recording stops when the stop (7) key of the CD player is
pressed. To stop the CD playback, press the stop (7) key
again.
Let's record
There may be cases in which beat noise interferes
with recording of AM(MW)/ LW broadcasting.
In such a case, press the TAPE EQ. key during record-
ing to reduce or suppress the beat noise.
Beat cancel function (For U.K.)
TAPE EQ.