Kenwood XD-303 Stereo System User Manual


 
24
Basic section
A tip for the use of the tape counter
The tape counter is set to “0000” when a cassette tape
is loaded. In case you want to interrupt recording
(playback) in the middle of the tape, the counter read-
ing will be helpful as a reference for locating the same
position when continuing the recording (playback)
the next time. The tape counter figure decrements
during recording or playback of the reverse side
(while the 2 tape transport indicator is lit).
To set the tape counter to “0000”, open the cassette
holder once. Then the counter will be reset.
Let's have sound
Relay play
÷ Relay play is not possible in the reverse modes
and .
÷ If a tape is loaded only in either deck, playback stops
after having played both sides of the tape.
When tapes are set in the decks A and B and the re-
verse mode is set to “ ” (play of both sides), play of
the second deck will be started automatically after
play of the first deck has been completed. Tape play
will be repeated alternately.
AA
T0APE 000