Filter
Top Products
21
EN
Preset memory scan
The stations saved in the preset memory can be
scanned automatically.
1 To scan the preset stations, press the P. CALL
(4 1 or ¡ ¢) button for more than 0.5
second.
• The station preset number will flash and the pro-
grammed stations will be tuned in sequentially,
for 5 seconds each.
2 Press the P. CALL (4 1 or ¡ ¢) button
again to stop the memory scan at the desired
station.
Note :
When the preset memory does not have any sta-
tions stored in it, the preset memory scan will not
function.
To erase all the contents in the preset
memory :
1 Press the ON/STANBY button to enter the
standby mode.
2 Press the ON/STANDBY button whilst
holding down the TUNER (BAND) button and the
SOUND MODE button.
• “PGM” will light up on the display and “TUNER
CL” will appear.
• After performing this operation, all of the preset
memory information will be erased.
P.CALL
4 1
¡ ¢
P.CALL
4 1 ¡ ¢
SOUND
MODE
ON/
STANDBY
TUNER
(BAND)