Filter
Top Products
26
EN
• If 40 stations have already been stored in
memory and the AUTO MEMORY button is
pressed, “END” will appear immediately and the
scan will be aborted.
If you want to redo the ASPM operation from
the beginning, erase the preset memory, and
then perform steps
1 - 4.
• If the RDS station broadcast signals are very
weak, station names may not be stored in
memory.
To stop the ASPM operation before it
is complete :
Press the AUTO MEMORY button whilst it is scan-
ning for stations.
• The stations that have already been stored in
memory will be kept there.
To erase all the contents in the preset
memory :
1 Press the ON/STANDBY button to enter
the standby mode.
2 Press the ON/STANDBY button whilst
holding down the TUNER (BAND) button and the
SOUND MODE button.
• “PGM” will light up on the display and “TUNER
CL” will appear.
• After performing this operation, all of the preset
memory in formation will be erased.