Kenwood XD655 Stereo System User Manual


 
18
EN
Program playback
You can playback the tracks on the CDs in the disc
1-3 position in any order desired. By specifying the
disc numbers from 1 to 3, and the track numbers
from 1 to 99, you can choose up to 32 selections
for playback in the order you like.
1 When in the stop mode, use the disc number
buttons (DISC 1 - DISC 3) to select the desired
disc number.
2 Press the P. CALL 4 1 or ¡ ¢ button
to select the desired track.
3 Press the MEMORY/SET button.
“PGM” will light up on the display to show that
the programmed sequence is being entered into
memory.
4 Repeat steps 1 - 3 for any other track. Up to
32 tracks can be programmed.
If you make a mistake whilst in the program-
ming mode (“PGM” will light up on the display)
or if you wish to change your selections, the pro-
grammed tracks can be cleared by pressing the
CLEAR button. The tracks will be cleared
sequentially, starting with the last track entered.
5 Press the 3 button to start playback of pro-
grammed selections.
To clear the programmed selections :
Press the CLEAR button on the remote control
whilst the disc is stopped.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
Notes :
Opening the disc tray, automatically cancels the
programmed sequence.
Even if you press the ON/STANDBY button
to enter the standby mode or the function is
changed from CD to some other function, the
programmed selections will not be cleared.
During program playback operation, random play
is not possible.
1
2
2
3
3
5
5
CLEAR