Filter
Top Products
27
EN
Normal playback
Listening to a source component
VOLUME CONTROL
AV AUX/GAME
INPUT
SELECTOR
1
Use the INPUT SELECTOR and AV AUX/GAME keys or Input
Selector keys to select the source you want to listen to.
Selecting a source using each key.
1 TUNER
2 CD/DVD
3 MD/TAPE
4 VIDEO 1
5 VIDEO 2
6 VIDEO 3
7 DVD/6CH
8 PHONO
9 AV AUX [GAME] (or AV AUX)
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob or VOLUME
%
/
fi
keys to
adjust the volume.
Set up the AV AUX jacks on the front panel
Perform the setup for convenience of playing a video game using the
receiver.
1 Use the AV AUX/GAME key to select “AV AUX [GAME]” (or “AV
AUX”).
2 Press and hold the AV AUX/GAME key for more than 2 seconds
for the following selections;
1 AV AUX [GAME] : When the connected game player is turned
ON, the input selector is switched automati-
cally to “AV AUX [GAME]”. In addition, the
ACTIVE EQ function is switched to “ACTIVE
EQ GAME”, and the Listen mode is switched
to the appropriate mode for games.
2 AV AUX : The game mode is switched off.
•
The game mode is not activated if no video signal is input to the VIDEO
or S-VIDEO jack in the AV AUX jack section.
Preparing for playback
Some preparatory steps are needed before starting playback.
POWER ON/OFF
INPUT MODE
SPEAKERS
(POWER
ON/STANDBY)
(KRF-X9090D)
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
(POWER
ON/STANDBY) key (VR-9080), or the POWER ON/OFF key and
(POWER ON/STANDBY) key (KRF-X9090D) .
Selecting the input mode
If you have selected a component connected to the CD/DVD, VIDEO 2,
VIDEO 3 or DVD/6CH jacks, make sure that the input mode setting is
correct for the type of audio signal to be used. 8
Selecting the speaker system
Press the SPEAKERS key to select the speaker system to be used.
A ON :
Sound from the speakers connected to the SPEAKERS A
terminals.
B ON : Sound from the speakers connected to the SPEAKERS B
terminals.
A ON, B ON : Sound from both the speakers connected to the
SPEAKERS A and B terminals.
OFF : No sound from the speakers.
The indicator for the speakers
you want to use should be lit.
L
SL S SB SR
C R
SP MUTE
AB CLIP
LFE
• Selecting “6CH INPUT” by pressing the INPUT MODE key, whereby
“DVD/6CH” is the input source will cause SPEAKERS A to be selected
automatically.
• When the SPEAKERS B is turned ON, the Listen mode will be
switched to Stereo.
• Turn on SPEAKERS A if using PRE OUT terminals including Subwoofer
to output sound.
05.7.16, 1:26 PM27