Filter
Top Products
112
Performing Reset
There are 2 ways to enter the Reset Mode selection.
However, the transceiver’s Lock function must be turned
OFF {page 88}.
When the transceiver is turned OFF:
■ Full reset
1 Press [F]+[ ] (POWER).
• All indicators are lit.
2 Release [F].
• The full reset confirmation message, “FL.RST?”,
appears.
3 Press [F] to proceed.
• “SURE ?” appears.
• Press any key other than [F], [LAMP] and
[MONI/SQL] to exit the Reset Mode.
4 Press [F] to reset the transceiver.