Filter
Top Products
116
Transmission
If you continuously transmit for more than 8 minutes
at high power (5 W), the transceiver becomes warm.
If you continue or repeat the transmission before the
transceiver cools down, the thermal protector gradually
decreases the output power down to 1.5 W.
“ ” also blinks at the same time. If this happens, let the
transceiver cool down for a while before transmitting
again.
Internal Beats
On some spots of the frequency {page 121}, the
S-meter moves without receiving any signals or you
cannot receive any signals. This is inevitable when you
use super-heterodyne receivers. If this happens,
access Menu No. 28 (BS) and select “ON”.