Filter
Top Products
3 Programming the SMC-33 Remote
Control Speaker Microphone
VFO
MR
CALL
PTT
switch
Earphone
jack
LOCK switch
These keys function just like the VFO, MR, and
CALL keys on the front panel of the transceiver.
To reset the function of the transceiver keys.
1
Connect the SMC-33 to the MIC jack on top of the
transceiver.
2 Press and hold Microphone key 1 (or 2 or 3) and
turn the power on. The programmable function
(PF) indicator appears for 10 seconds.
3
Press a key on the transceiver - or press F and a
key - to assign that key’s function to key 1 (or 2 or
3) on the SMC-33. The possible functions for the
SMC-33 keys 1, 2, and 3 are listed on the next
page.
For example, press the BAND key on the
transceiver to make key 1 on the SMC-33 function
as the BAND key. Press the F key, then the
BAND key to make key 1 function as the A.B.C.
key.
Turn the LOCK switch on to disable microphone
keys 1, 2, and 3.
You can use the SMC-33 with models that have
no remote function for simple transmit and receive
function. No remote functions will be possible.
Make sure the LOCK switch on the back of the
microphone is on before using it with such models.
65