Filter
Top Products
48
Application section
Recording preparations are required.
›
(Steps 1 to 4)
Recording programmed tracks
(CD PROGRAM RECORDING)
Program the desired tracks from up to 3 CDs in
the order you want and record the programmed
playback onto tape.
Convenient CD recording
When effects are applied to the sound, the
effect applied to the sound can be re-
corded.
R
+“CD Program Recording” is scrolled in the display
To end recording in the middle
÷ Both the cassette deck and CD player stop.
+“Press “ENTER” to Start, “MULTI” to Edit
and Check” is scrolled in the display
PGM
÷ The program mode is maintained even after recording is
completed. To return to the normal playback mode,
cancel the program playback mode. °
1
Select “Recording Options” .
2
Select “CD Program Recording”.
3
Program the desired tracks.
4
Start recording.
1 Select tracks in the order you want to
play them. (Perform step 3 on page 37.)
2 Check, replace, add or delete the pro-
grammed tracks as required.
(Perform steps 1 and 2 on page 38.)
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Direct Recording”
“CD Program Recording”
“Timer Recording”
“Digital Rec Mode” (NV-701 only)
Lights
+“Recording Options” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Program Play”
“Recording Options”
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Setup” (NV-701 only)
ENTER
MENU
DEMO
SET
MULTI CONTROL
SET
MULTI CONTROL
Press "ENTER
CD Program R
Recording Op
ENTER