Filter
Top Products
10
Preparation section
DVD player (NV-701 only)
When making audio connections to a DVD player or similar component:
÷ For complete video connection, use commercially available video cables to make connections from the video output jack on
the DVD player to the VIDEO 2 PLAY IN jack, and from the VIDEO MONITOR OUT jack to a TV or monitor.
÷ When making analog connections from a DVD player that only features right and left channel stereo output, make
connections to the AUDIO – VIDEO 2/6 CH INPUT FRONT R and L jacks respectively. When making this type of
connection, do not make connections to the CENTER, SUBWOOFER, or SURROUND R/L jacks.
÷ When you are making connections from a DVD player that features internal decoding or when the digital signal is
routed through a decoder for full 6 channel discreet audio output, make connections from the output jacks on the DVD
player or decoder to the corresponding AUDIO – VIDEO 2/6 CH INPUT jacks .
÷ For greatly improved sound, make connections to the DIGITAL VIDEO 2 OPT. IN jack using a commercially available
optical-fiber cable.
÷ If digital connections are made to the DIGITAL VIDEO 2 OPT. IN jack, it is also recommended to make connections to
the appropriate analog AUDIO – VIDEO 2/6 CH INPUT jacks.
The VIDEO 2 jacks can be used for connection of a DVD player or similar component that features audio and/or
video output capability.
AUDIO–VIDEO2 / 6 CH INPUT
SUBWOOFER
CENTER
SURROUND
FRONT
2
VIDEO
PLAY IN
L
R
MONITOR
OUT
VIDEO 1
COAX. IN
OPT. IN
VIDEO 2
DIGITAL
OPT. OUT
CD
AUDIO–VIDEO 1
1
PLAY IN REC OUT
Optical-fiber cable
Digital output
Video output
DVD player
Audio output
(CENTER/
SUBWOOFER)
TV
To video input of TV
System connection
Audio output
(SURROUND)
Audio output
(FRONT)
For digital audio
output of CDs
About the DIGITAL jacks on this unit
When using the DIGITAL OPT. (optical) jacks, remove
the cap and plug in the optical-fiber cable.
VIDEO 1
COAX. IN
V DEO 2
DIGITAL
OPT. OUT
CD
Optical-fiber cable
Cap
÷ Insert the optical-fiber cable straight into the
connector until it clicks.
÷ Be sure to attach the protection cap when the
connector is not used.
÷ Never bend or bundle up the optical-fiber cable.
(NV-701 only) When using the DIGITAL VIDEO 1
COAX. IN jack, insert the coaxial cable firmly into the
jack.
Coaxial audio cable