Filter
Top Products
English
17
⁄
• During program, if no button is pressed within 20 seconds,
the system will exit program mode automatically.
Tuning to a preset radio station
Press P.CALL/ALBUM 5 or ∞ [p.call/album up or
down], or digit buttons 0–9 to select the desired
preset number.
The preset number and radio frequency appear on
the display.
⁄
• Press the digit buttons as shown below:
FM AM
To select 1 1 and ENTER 1 and ENTER
To select 2 2 and ENTER 2
To select 3 33
To select 10 1 and 01 and 0
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in
the form of digital data) for FM broadcasts along with
the broadcast signal. Tuners and receivers designed
for RDS reception can extract the information from
the broadcast signal for use with various functions,
such as automatic display of the station name.
RDS functions
PTY (Program TYpe Identi cation) Search:
Automatically tunes to a station that is currently broadcasting
the specified program type (genre).
PS (Program Service Name) Display:
Automatically displays the station name transmitted by the RDS
station.
Radio Text function:
Displays the radio text data transmitted by some RDS stations
when you press the RDS DISPLAY button. There is “NO TEXT”
display if no text data is transmitted.
⁄
• Some functions and function names may differ in certain
countries and areas.
Using the radio
Tuning in radio stations
1 Press TUNER band [TUNER band] button to
select the desired waveband: FM or AM.
2 Press and hold SEARCH/TUNING 4 or ¢
[4 or ¢ search +/–] button to tune in to the
desired frequency.
⁄
• To tune to a weak station, briefly press SEARCH/TUNING
4 or ¢ [4 or ¢ search +/–] button repeatedly until
the display shows the desired frequency or when the best
reception has been obtained.
STEREO/MONO
Press the STEREO/MONO button to select mono or
stereo mode.
When stereo mode is selected, the icon “STEREO”
appears on the display (if current station is FM
stereo).
⁄
• You are able to select stereo or mono mode in FM band only.
Storing preset
You can store up to 20 for FM and 10 for AM radio
stations in the memory. When a preset radio stations
selected, the preset number appears on the display.
1 Press TUNER band [TUNER band] button to
select the desired waveband: FM or AM.
2 Press SEARCH/TUNING 4 or ¢ [4 or ¢
search +/–] button to tune in to the desired
frequency.
3 Press P.MODE button so that “P – –” appears on
the display.
4 If you want to store the radio station to another
preset number, press P.CALL/ALBUM 5 or ∞
[p.call/album up or down] to select the desired
preset number.
5 Press ENTER button again to store the radio
station.
6 Repeat steps 2 to 5 to store other preset radio
stations.