Kenwood KRF-V9993D Stereo Receiver User Manual


 
13
Using Receiver
How Do I Adjust the Sound?
3. Touch to turn the tone settings on or off.
4. If you selected “on” in the above, touch the left
or right
arrow next to a tone setting (Treble or Bass) to adjust it. A readout
between the arrows shows the current setting.
5. Touch
to return to the previous menu or touch any Quick Access
menu button to access that menu.
Operation on the receiver:
1. Press the SOUND key in the door repeatedly until TONE OFF or ON
is displayed.
2. Press the MULTI CONTROL (%/) key to display TONE ON (or OFF
if desired so).
3. When ON is selected above and the SOUND key is pressed again, the
BASS setting menu appears.
When OFF is selected above, the LOUDNESS setting menu appears.
4. Adjust BASS level using the MULTI CONTROL (%/) key.
5. Press the SOUND key.
6. When the TREBLE setting menu appears, adjust the treble in the same
way as above. To exit from setting, press the SOUND key repeatedly
until “SOUND FIXED” is displayed.
Adjusting Speaker Levels
You can use the Sound menu to temporarily adjust the speaker levels of
your center speaker, surround speakers, and subwoofer. For example, if a
particular movie has dialog that’s hard to understand, you can tempo-
rarily increase the center channel volume just for that movie. For more
information on adjusting speaker levels permanently, see Chapter Two:
Setting Up PowerTouch in the Connections and Setup Guide.