Filter
Top Products
21
Operations
Ambience effects
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic"
and the double-D symbol are trademarks of Dolby Laboratories. Confiden-
tial Unpublished Works. ©1992-1997 Dolby Laboratories. All rights re-
served.
This receiver is equipped with listening modes that allow
you to enjoy an enhanced sonic ambience with a variety of
video sources.
In order to obtain the optimum effect from the surround
modes, make sure to input the proper speaker settings
beforehand. $
Surround modes
Dolby Digital (AC-3)
The Dolby Digital (AC-3) surround format lets you enjoy up to 5.1
channels of digital surround sound from Dolby Digital (AC-3) program
sources (such as Laserdisc or DVD software marked
). Com-
pared with previous Dolby surround, Dolby Digital (AC-3) provides even
better sound quality, greater spatial accuracy, and improved dynamic
range.
Note
Although a full set of speakers (front left, right, and center, surround left
and right, and a subwoofer) is required for true 5.1 channel Dolby Digital
(AC-3) surround sound, this receiver lets you enjoy Dolby Digital (AC-3)
(and Dolby Surround) program sources, even if you connect only the
front speakers. ("Speaker placement") #
* LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep bass
sound effects.
Although only Dolby Digital (AC-3) soundtracks incorporate a separate
low frequency channel, connecting a subwoofer will also improve deep
bass performance in the other surround modes.
The indication "LFE" appears in the display when a signal is being input
for this channel.
Front speaker (L, R)
Subwoofer (LFE)*
Center speaker
Surround speakers (L, R)
DTS
The DTS multi-channel audio format is available on CD, LD and DVD
software. DTS is a strictly digital format and can not be decoded inside
most CD, LD or DVD players. For this reason, if you attempt to listen to
DTS encoded software through the analog output of your new CD, LD
or DVD player, you will experience digital noise in most cases. This noise
can be quite loud if the analog output is connected directly to a high
power amplification system. Proper measures for playing the digital
output as described below should be taken to avoid this situation. To
enjoy DTS Digital Surround playback, an external 5.1 channel DTS
Digital Surround decoder system or an amplifier with a built-in DTS
Digital Surround decoder must be connected to the digital output (S/P
DIF, AES/EBU or TosLink) of a CD, LD or DVD player.
* Optional in this mode.
* LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep
bass sound effects.
DTS has a .1 or LFE channel.
The indication "LFE" appears in the display when a signal is being
input for this channel.
Front speaker (L, R)
Subwoofer (LFE)*
Center speaker
Surround speakers (L, R)
Dolby Pro Logic is a specially encoded 2 channel surround format
designed to provide theater-like surround sound from Dolby Surround
encoded sources (such as video and Laserdisc software marked
). This receiver is equipped with a Dolby Pro Logic
surround decoder to let you enjoy the wide variety of currently available
Dolby Surround home video software.
Dolby Pro Logic
Manufactured under license from Digital Theater
Systems, Inc. US Pal. No. 5,451,942 and other
worldwide patents issues and pending.
“DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights re-
served.
Front speaker (L, R)
Subwoofer (SW)
Center speaker
Surround speakers (L, R)
Continued to next page
"Circle Surround and the symbol are trademarks of SRS Labs,
Inc. in the United States and selected foreign countries. Circle Surround
technology is incorporated under license from SRS Labs, Inc".