Kenwood KRF-V6100D Stereo System User Manual


 
34
EN
In case of difficulty
Remote control unit
Cause
The remote control is set to the DVD player
operation mode.
Batteries are exhausted.
The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between this
model and the remote.
The remote control has not been changed to
the operation mode for the KENWOOD DVD
player you wish to control.
Symptom
Remote control operation is not possible.
Remedy
Press any of the Input Selector keys to select
the appropriate operation mode.
Replace with new batteries.
Operate the remote control unit within the
controllable range. 4
Press the CD/DVD or DVD/6CH key to activate
the operation mode for the component you
want to control before operation. ¤
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
5632_33-36_EN 06.4.20, 2:01 PM34