Kenwood KRF-V6100D Stereo System User Manual


 
20
EN
Normal playback
Adjusting the sound
Adjusting the Tone (remote control only)
You can adjust the sound quality when this model is in the PCM stereo
and analog stereo mode.
1 Press the TONE key to select the Tone mode.
2 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys to
select TONE ON or TONE OFF.
3 When in TONE ON selection, press the TONE key for the
following displays.
BASS : Select this to adjust the low frequency range.
TREB : Select this to adjust the high frequency range.
4 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys to
adjust the sound quality.
The bass and treble levels are adjustable from
-
10 to +10 in 2 step
increments.
When the ACTIVE EQ mode is set to ON, set it to OFF and then
control the TONE setting.
One-touch low frequency emphasis (Bass Boost)
(remote control only)
You can adjust the sound quality when this model is in the PCM stereo
and analog stereo modes.
Press the BASS BOOST key.
Press the key once to select the maximum (+10) low frequency
emphasis setting.
TONE will automatically be turned ON.
This key does not function when this model is in the sound quality
or ambience effects adjustment mode. §~
When the ACTIVE EQ mode is set to ON, set it to OFF and then
control the BASS BOOST setting.
Switching back to the previous setting
Press the BASS BOOST key again.
SPEAKERS ON/OFF
ACTIVE EQ
ACTIVE EQ
BASS BOOST
LOUDNESS
PHONES MULTI CONTROL MUTE
VOLUME CONTROL
TONE
MULTI CONTROL %/
VOLUME %/
MUTE
Adjusting the Loudness mode (remote control only)
You can adjust the Loudness function which controls the low volume
settings to maintain the musics richness. The adjustment can be made
when this model is in the PCM stereo and analog stereo mode.
Press the LOUDNESS key to turn the Loudness setting ON.
To cancel
Press the LOUDNESS key again so that the LOUDNESS indicator
goes off.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
To cancel
Press the MUTE key again so that the MUTE indicator goes off.
MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob (or pressing the VOLUME %/ keys).
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1 ACTIVE EQ MUSIC : Effective when listening to music.
(The ACTIVE EQ LED indicator lights up.)
2 ACTIVE EQ CINEMA : Effective when watching a movie.
(The ACTIVE EQ LED indicator lights up.)
3 ACTIVE EQ TV : Effective when watching TV.
(The ACTIVE EQ LED indicator lights up.)
4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ LED indicator goes off.)
ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON and during 96kHz LPCM
playback.
Listening with headphones
1 Press the SPEAKERS ON/OFF key so that the speaker indicator
goes off.
If you turn off all of the speakers when in surround mode, the
surround mode will be canceled as well, resulting in stereo playback.
2 Connect headphones to the PHONES jack.
PHONES
3 Use the VOLUME CONTROL knob or VOLUME %/ keys to
adjust the volume.
Make sure the SP indicator is turned OFF.
5632_16_25_EN 06.4.20, 2:00 PM20