Kenwood KRF-A4020 Stereo System User Manual


 
KRF-A4020 (En/E2T)
Operations
Preparations
Other
8
Remote control unit
1 Numeric keys (1~0, +10)
If CD or MD is selected as the input source, these keys
function as numeric keys. If tuner is selected as the input
source, these keys are used to call up station presets.
2 Component operation keys
Use these keys to operate other components with system
control connections to the receiver.
TUNING (1 ¡) keys
#
If tuner is selected as the input source, these keys func-
tion as tuning keys.
If CD or MD is selected as the input source, these keys
function as search keys.
P.CALL (4 ¢) keys
%
If tuner is selected as the input source, these keys func-
tion as P.CALL keys.
If CD or MD is selected as the input source, these keys
function as skip keys.
2 key
If tape is selected as the input source, this key functions
as the play key for side B of the cassette (the side facing
away from the front of the deck).
BAND (6) key
#
If tuner is selected as the input source, this key functions
as the band selector key.
If CD is selected as the input source, this key functions as
the play/pause key.
If MD is selected as the input source, this key functions as
the play key.
DISC SKIP, A/B, +100 key
If CD is selected as the input source, this key functions as
the multi-CD player disc skip key.
If TAPE is selected as the input source, this key is used to
switch between the two decks (A and B) of a double
cassette deck.
If MD is selected as the input source, this key function as
numeric key.
AUTO(7) key
#
If tuner is selected as the input source, this key functions
as the AUTO key.
If CD or MD is selected as the input source, this key
functions as the stop key.
3 VOLUME UP, DOWN keys
0
4 MEMORY key %
Use to store radio stations in the preset memory.
5 SOUND key
!
Use to adjust the sound quality.
6 BASS BOOST key
!
Use to select the maximum adjustment setting for the low
frequency range.
7 DIMMER key
$
Use to adjust the brightness of the display.
8 Input selector keys
0
Use to select the receiver’s input source.
9 RDS operation keys
#
Use to receive RDS broadcasts.
0 POWER (
)key 0
Use to switch the power ON/STANDBY when the POWER
is turned ON.
! S.DIRECT key
!
@ MUTE key !
Use to temporarily mute the sound.
# MULTI CONTROL keys
Used to make a variety of settings.
$ BALANCE key
!
Use to adjust the sound balance.
% TAPE2/ MONITOR key
0@
Names and functions of parts
Model: RC-R0708
Infrared ray system
DIMMER
BASS BOOST
TUNER CD
1 2 3
4 5 60
7 8 9 +10
TAPE2/
MONITOR
TA/NEWSPTY DISPLAY AUX
MULTI CONTROL
MD/TAPE1
REMOTE CONTROL UNIT
RC-R0708
8
PHONO
6 7
¡
2
TUNING
DISC SKIP
%
VOL. DOWN
VOL. UP
MEMORY
S.DIRECT
SOUND BALANCE
fi
1 ¢P.CALL4
BAND AUTO
A/B +100
POWER
1
2
#
3
4
5
6
7
0
!
$
%
@
9
fi
fi
MUTE