Kenwood KRF-V6050D Stereo Receiver User Manual


 
13
Preparations
L
VIDEO 1
R
A
LC
LR
LR
B
PLAY INREC OUTPLAY IN
MONITOR
OUT
VIDEO 1
DVD
R
75µs
AM 10kHz
FM 100kHz
50µs
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
DVD
VIDEO 2/MONITOR
COAXIAL
CD/DVD
OPTICAL
DIGITAL IN
Digital connections
COAXIAL
DIGITAL
OUT
(AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video components”.)
!
DOLBY DIGITAL RF
OUT (AUDIO)
COAXIAL DIGITAL OUT (AUDIO)
LD player
PCM OUT
Component with a DTS, Dolby
Digital, or PCM COAXIAL
DIGITAL OUT
Setting up the system
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable
of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode
settings” section carefully. 9
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2/MONITOR jacks. (See “Connecting video components”.)
RF digital
demodulator
(DEM-9991D)
(sold separately)
CD player
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber
cable
_4942/10-19/EN 3/16/01, 3:04 PM13