This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Turning the Beep On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Touch Sensor Tone
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Beep ON" or "Beep OFF" in
the display, indicating that the current beep setting is on or off,
respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
The beep sound is not output from the preout jacks.
NOTE
4
3
2
1
Touch Sensor Tone
The function setting is indicated by "COL GRN" or "COL AMB" in
the display, indicating that the current colour is green or amber,
respectively.
Switching settings
Press either the AM button or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
You can switch the colour of the button illumination between
green and amber.
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Selectable
Illumination function appears in the display.
Press the 4 button to search in the other direction.
2
1
Selectable Illumination
Shut down the audio system temporarily whenever an
incoming call is received.
The function will not work if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL Mute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
NOTE
TEL Mute
The dimmer function is not available for units if the dimmer cable
is not connected.
NOTE
— 27 —
KRC-6901R_U.K 2003.10.06 08:13 AM Page 27