Filter
Top Products
Store the names of discs to be displayed when played.
Play the disc whose name you want to preset.
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• This procedure is not to be used to store the disc and track titles
for MDs that you record.
Hold down the NAME.S button for two seconds or more.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
You can also move the cursor left or right by pressing the
TRACK
+ or TRACK– buttons, respectively, on the remote
control.
Each time the 38 button is pressed, the characters to be
entered change as listed below.
Press the DISC+ or DISC– button to display the desired
character.
4
3
2
NOTE
1
Presetting Disc Names
This function is not available with the following models:
KDC-C200/C300/C400/C301/C401
To change the track being heard, press the ¢ button.
Another disc/track is selected and played.
• The magazine random play function is cancelled when you stop
playing a disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
NOTE
2
Play the tracks on all the discs in the disc changer in random
order.
Press the M.RDM button to switch the magazine random play
function on and off.
"MRDM ON" is displayed when magazine random play is turned
on.
The display of the disc and track numbers change continuously
as the next track is being selected.
When the disc/track has been selected, play starts.
The selected disc/track number blinks in the display as it is
being played.
NOTE
1
Magazine Random Play
Play all the tracks on the current disc in random order.
Press the RDM button to switch the random play function on
and off.
"RDM ON" is displayed when random play is turned on.
The display of the track number changes continuously as the
next track is being selected.
When the track has been selected, play starts.
The selected track number blinks in the display as it is being
played.
When all the tracks on a certain disc have been played using the
random play function, the next disc on the changer starts playing
(with the random play function still turned on).
To change the track being heard, press the ¢ button.
Another track is selected and played.
The random play function is cancelled when you stop playing a
disc.
NOTE
2
NOTE
1
Random Play
External disc control features
— 22 —
English
KRC-6901R_U.K 2003.10.06 08:13 AM Page 22