Filter
Top Products
English
|
25
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1 Select Bluetooth device deletion mode
Select “MENU”
> “Device Delete”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Bluetooth device deletion mode
Press the Control knob for at least 1 second.
“(name)” is displayed.
3 Select the Bluetooth device
Turn the Control knob.
4 Delete the selected Bluetooth device
Press the Control knob.
“Delete?” is displayed.
5 Turn the Control knob to select “YES”, and then
press the Control knob.
“Delete” is displayed.
6 Exit Bluetooth device deletion mode
Press the [FNC] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1 Enter Bluetooth Firmware update mode
Select “MENU” > “BT F/W Update”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second.
The firmware version appears.
3 Exit Bluetooth Firmware update mode
Press the [FNC] button.
⁄
• For how to update the firmware, access our web site.
http://www.kenwood.com/bt/information/
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1 Select Bluetooth device selection mode
Cell-phone
Select “MENU” > “Phone Selection”.
Audio player
Select “MENU” > “Audio Selection”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Bluetooth device selection mode
Press the Control knob for at least 1 second.
“(name)” is displayed.
3 Select the Bluetooth device
Turn the Control knob.
4 Set up the Bluetooth device
Push the Control knob towards right or left.
“✱(name)” or “-(name)” is displayed.
“✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
5 Exit Bluetooth device selection mode
Press the [FNC] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.