Kenwood VR-5090 Stereo System User Manual


 
36
Chapter Two : Setting Up the Remote Control Unit
Remote Setup
Before you can begin using the receiver to control your home
entertainment system, you must set up Remote Control unit
to operate your speakers effectively. There are four areas of
speaker setup:
Selecting the Speakers
Balancing the Speaker Volumes
Bass Peak Level
Adjusting the Speaker Distances
The receiver must be on and speakers must be connected
before you can set up speakers.
Setting Up Speakers
Selecting the Speakers
1. Press the POWER ON/STANDBY button on the main
unit to turn the power on.
2. Press the MUSIC button or MOVIE button to display
the Menu.
REC
REC
Surround SetUp
Sub Woofer = On
Home Next
REC
01.IR
02.Surround
03.Contrast
Home Enter
3. Press the Menu button (LCD function button 2).
4. Press the Setup button (LCD function button 2).
5. Press the LCD cursor up/down button (
, ) to se-
lect 02. Surround, then press the Enter button (LCD
function button 2)
6. Press the LCD cursor up/down button (
, ) to se-
lect Sub Woofer On or Off, then press the Next button
(LCD function button 2).
If you selected On for the subwoofer, all of the bass
below 80Hz is removed from all other Nml (Normal)/
THX setting speakers in your system and is sent to
the subwoofer in all listening modes. This improves
your speakers power handling and reduces overall dis-
tortion.
If you selected Off for the subwoofer, the bass tone
is removed from all other Nml/THX setting speakers
in your system and is sent to the front L and R speakers.
To abort setup, press the MUSIC button, MOVIE but-
ton or Home button.
Select Nml/THX for the speaker for use in THX re-
production.
7. When the front (left and right) speaker setting menu
(Front) appears, select Front Nml (Normal)/THX or
Large in the same way as step 6, then press the Next
button. (If you set the subwoofer to Off in step 6, skip
this step.)
Tuner
FM 01ch Auto
87.50MHz
Menu
REC
Home Setup
FL FR
C
SW
SL SR
SBL SBR
Speaker Placement
An example of installation is shown here.
Use this figure as a reference for installing the system ac-
cording to the types of your speakers and conditions of your
listening room.
FL/FR (Front speakers) : Place to the front left and right
of the listening position. Front speakers are required for all
surround modes.
C (Center speaker) : Place front and center. This speaker
stabilizes the sound image and helps recreate sound mo-
tion.
SW (Subwoofer) : Reproduces powerful deep bass sounds.
SL/SR (Surround speakers) : Place to the direct left and
right, or slightly behind, the listening position at even
heights, at least 3.3 ft (1 meter) above the ears of the listeners.
SBL/SBR (Surround back speakers) : The SBL/SBR
speakers are required to reproduce 6.1-channel signals
(THX Surround EX, DTS-ES). Place them on the left and
right behind the listening position and at the same height
as the SL/SR speakers.