Kenwood CD-425M Stereo System User Manual


 
26
Programming tracks in desired order (PGM mode)
Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5Chapter 6Chapter 7
12:00
o PUSH OPEN
)
Timer operation
As this unit incorporate the timer standby function, play-
back can be started at desired moment if a commercially
available audio timer is combined with this unit.
1
Set the power switches of the system compo-
nents to the ON positions.
÷The disc number can be selected directly by using the DISC SELECTOR
button and numeric buttons in place of the DISC SKIP(DOWN/UP)
buttons.
Preparation
÷Close the disc door. *
÷Connect the system components so that
their power can be switched on by the timer.
÷Read the instruction manual of the timer
carefully.
2
Select the disc to be played.
Previous disc Next disc
Within 8 seconds!
1Select the disc number.
2Play the disc.
Audio timer
To AC outlet
Receiver or amplifier
This unit
Audio cable
3
Set the listening volume.
1Adjust the volume on the amplifier or receiver.
2Stop playback.
4
Set the timer for the desired ON time.
5
Set the TIMER PLAY switch to ON.
÷Read the instruction manual of the timer carefully.
÷When the set time comes, playback will start automatically.
÷The playback mode will be TRACK mode.
Main unit
ENTER
6
TIMER PLAY
OFF ON
DISC SKIP
DOWN UP