Filter
Top Products
18
Preparation
Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5Chapter 6Chapter 7
LAL ADATRAE 3D
Disc replacement
Discs can be replaced with the same procedure as “Loading discs
in the carousel”. In stopped condition, all discs can be exchanged.
However, when the disc door is opened while “DISC DETEC-
TION” is being displayed, it may not be possible to remove the
disc which had been played. Accordingly, wait for the “DISC
DETECTION” indication to go out before opening the disc door.
When the disc information has been read in at the time of regis-
tration of disc information like title, music type, etc., the disc
information can be recalled even when the disc insertion place
is changed.
ª
÷When a title has been registered and the disc door is closed, reading
operation is performed automatically.
The display flashes.
In regard to ALL DATA READ mode
The disc information for all discs will be read. We recommend to
execute this mode before playback after discs have been exchanged.
Close the disc door before operation.
1 Press the MODE button.
2 Select “ALL DATA READ”.
3 Set the input.
Each press switches the modes as follows:
Search in progress or
reading information
The display flashes.
When the disc is CD-TEXT
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display
will appear for approx. 3 seconds.
1. Please remove all CDs from the carousel before moving the unit.
2. If blinking “PLEASE WAIT” is displayed when the disc door is opened, do not attempt to change the disc.
4
Close the disc door.
To quit ALL DATA READ mode
Press the 7 button.
1 MUSIC TYPE
2 USER FILE
3 DISC SEARCH
4 TITLE INPUT
5 ALL DATA READ
6 ALL INFORMATION
IDCSDC TECEIT 3O
N N
Notes
Notes
DD SI CCERDANI 3G
0D10:: DCTA XE 3T
MODE
DISC SKIP
DOWN
UP
SET
To display the title on a LCD remote control unit (provided with a
KENWOOD Receiver or optional), perform the all data read opera-
tion first, and operate the LCD remote control unit with the door left
closed. For the operation of the LCD remote control unit, refer to
the instruction manual provided with your receiver or LCD remote
control unit.