Filter
Top Products
16
Programming tracks in desired order (PGM mode)
GP0M E12D00T1 -- C
Use the following procedure to select desired tracks (up to
32 tracks) from different discs and program them in the
desired order.
Preparation
÷Set the CD player to stop mode.
Programming tracks in desired order
(PGM mode)
÷To program the entire disc, press the SET key without inputting the
track number. “ALL” will be displayed.
÷Program other tracks in the desired order by repeating steps 2 and 3.
÷Up to 32 tracks can be programmed. “FULL” is displayed when no
more tracks can be programmed.
÷If you make a mistake, press the CLEAR key and restart from step 2.
Press the numeric keys in the following order...
Track No.8 : 8
Track No.14 : 1, 4
Track No.20 : 2, 0
3
Select the track number.
1Input the track number.
2Set the input.
4
Start playback.
Within 8 seconds!
GP0M E12D00 D1SIC
1
Press so that the “PGM” indicator lights.
2
Select the disc.
÷The disc number can be selected directly by using the DISC SELECTOR
key and numeric keys in place of the DISC SKIP(DOWN/UP) keys.
÷When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected by the disc title.
“Registration of Title” )
÷If you make a mistake, press the CLEAR key and enter the disc No. from
the beginning.
Previous disc Next disc
Within 8 seconds!
1Select the disc number.
2Set the input.
Go to step 3 within 8 sec.
GP 3MESELTCD1 SIC
324
HIJK
LMN
O
PQRS
1
768
5
+100 +100
9
CHARAC.
/P.MODE
DISC SKIP
DOWN UP
SET
SET
ENTER
6