Kenwood CD-403 Stereo System User Manual


 
8
Operation of remote control unit
(Except for CD-403/DPF-R3030)
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In
such a case, change the system installation position to prevent the malfunction.
Loading batteries
*4 OUTPUT (DOWN, UP) keys 5
5 POWER key 9
*6 Numeric keys (1 ~ 0, +10)
!
7 Basic function keys
Stop key (7) 0
Play/Pause key (6) 0
Skip (4/¢) keys !
Search keys (1/¡) !
1 DISC SELECTOR keys 0
2 DISC SKIP key 9
3 Program-related and other keys
RANDOM key ^
REPEAT key &
P.MODE key #
TIME DISP. key @
* EDIT key (
CHECK key $
CLEAR key %
÷When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
After plugging in the power cord, press the ON/STANDBY ( POWER/
) key of the main unit to turn the power ON. When the unit is
turned ON, press the key of the function to be operated.
1 Remove the cover. 2 Insert batteries. 3 Close the cover.
÷Insert two AA-size (R6) batteries as
indicated by the polarity marking.
Operation
Operating range
(Approx.)
Remote control
light sensor
The keys with the same name as those on the main unit operate the same way as on the main unit.
The keys marked * are provided only on the remote control unit.
Notes
Notes
REMOTE CONTROL UNIT
RC-P0601
POWER
1
2
DOWN UP
3
45
6
78
9
P.MODE 0
+10
TIME
DISP.
CLEAR CHECK
SKIP
REPEAT RANDOM
EDIT
DISC
SELECTOR
OUTPUT
5
4
3
1
2
REMOTE CONTROL UNIT
RC-P0601
POWER
1
2
DOWN UP
3
45
6
78
9
P.MODE 0
+10
TIME
DISP.
CLEAR CHECK
SKIP
REPEAT RANDOM
EDIT
DISC
SELECTOR
OUTPUT
5
4
3
1
2
REMOTE CONTROL UNIT
RC-P0711