Kenwood CD-403 Stereo System User Manual


 
5
The OUTPUT level (UP/DOWN) keys of the remote control
unit can adjust the output levels from the LINE/OUT and
PHONES jack of the unit.
Connect a stereo headphone to the PHONES jack of the CD
player.
Output level
÷It is not favorable for the sound quality to decrease the output level from
this unit too much. Use these keys for coordination with other line
levels.
÷Adjusting the headphone output level also changes the LINE/OUT
level. Do not adjust the output level from this unit particularly during
recording.
Adjusting the output levels of the output jacks
and headphone output (Except for CD-403/DPF-
R3030)
To use the headphone (Except for CD-403/DPF-
R3030)
CD-406/DPF-R6030
CD-404/DPF-R4030
Output level
Amplifier or receiver
This unit
Cassette deck
NotesNotes
Notes
1. If your amplifier or receiver does not have a system control terminal, do not
connect any system control cords to the system control terminals on the other
components.
2. Do not connect system control cords to any components other than those
specified by KENWOOD. It may cause a malfunction and damage your
equipment.
3. Be sure the system control plugs are inserted all the way in to the system
control terminals.
System control connections
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
This unit is compatible only with the [SL-16] mode. The system
control operation is not available if the unit is connected in the
[XS-8] connection mode.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
÷You can connect the system control cord to either system control jack
of the unit.
System control operations
Remote Control
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.
Automatic Operation
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
Synchronized Recording
Lets you synchronize recording with the start of playback when recording from a CD. Also, the simple CCRS operation enables great recordings from
CDs.
See the operating instructions supplied with your cassette deck for details.
System connections
SINGLE
TOTAL
ALL
2019181716
1514131211
0
P.C.P.C.
109876
54321
REMOTE CONTROL UNIT
RC-P0601
POWER
1
2
DOWN UP
3
45
6
78
9
P.MODE 0
+10
TIME
DISP.
CLEAR CHECK
SKIP
REPEATRANDOM
EDIT
DISC
SELECTOR
OUTPUT
5
4
3
1
2
OUTPUT
DOWN UP
SYSTEM
CONTROL
SYSTEM
CONTROL
SYSTEM
CONTROL