Kenwood CD-403 Stereo System User Manual


 
19
Blinks.
CD-406/DPF-R6030
The following procedure allows to record a CD within the
specified tape length so that no music is interrupted in the
middle at the ends of sides A and B.
Editing
(Except for CD-403/DPF-R3030)
Preparation
1
Light the “EDIT” indicator.
÷Load a disc in the CD player.
÷Check that the unit is in the TRACK mode.
!
Select the disc.
2
Do this operation in the stop mode.
Go to step 2 within 8 seconds.
If more than 8 seconds have elapsed,
press the key again.
Go to step 3 within 8 seconds.
3
Press the numeric keys as shown below.
30-minute tape : +10, +10, +10, 0
46-minute tape : +10, +10, +10, +10, 6
÷The interval length can be adjusted with the skip keys 4 and ¢ in
one minute (to a maximum of 99 minutes). In this case, press the EDIT
key after you adjust the interval length.
÷If you commit a mistake in time entry, press the P.MODE key and
restart the procedure from the beginning.
÷Automatic editing is executed for side A and side B.
Enter the recording time of the tape.
When using the numeric keys:
2
Set the entry.
1
Select the time.
\
When using the TIME DISP. key:
CD-404/DPF-R4030
CD-406/DPF-R6030
CD-404/DPF-R4030
Blinks.
÷By pressing the TIME DISP. key the set time-length intervals will
change in this order:
Light up.
FILE
RANDOM
AUTO
PAUSE
BA
54321
PGM
MULTI
EDIT