Kenwood KDV-C840 Stereo System User Manual


 
— 37 —
? The subtitle is not displayed.
The DVD disc being played does not contain the recording of
subtitles.
The subtitle cannot be displayed when the DVD disc being played
does not contain the recording of subtitles.
? The voice (or subtitle) language cannot be changed.
The DVD disc being played does not contain the recording of more
than one audio (or subtitle) language.
The voice (or subtitle) language cannot be changed when the DVD
disc being played does not contain the recording of more than one
voice (or subtitle) language.
? The viewing angle cannot be changed.
The DVD disc being played does not contain the recording of more
than one angle.
The viewing angle cannot be changed when the DVD disc being
played does not contain the recording of more than one angle.
You are attempting to switch the angle in a DVD section where more
than one angle is not recorded.
More than one viewing angle may be recorded only in limited
sections in a disc.
? Playback will not start even after a title is selected.
A viewing restriction (RATING) has been set for the disc.
Check the viewing restriction level (RATING) setting.
? The voice or subtitle language selected in the initial setting is not
played.
The DVD disc being played does not contain the recording of the
selected voice or subtitle language.
Use a DVD disc containing the recording of the selected voice or
subtitle language.
MP3 source
? Cannot play an MP3.67
Not conforming to ISO 9660 Level 1/2, and Joliet.
Use a medium conforming to ISO 9660 Level 1/2, and Joliet.
The MP3 has no or invalid track name extension.68
Add the ".MP3" extension to the MP3 track name.
The media is scratched or dirty.69
Clean the media, referring to the section on <Disc cleaning>
(page 6).
?Noise or no sound generated when an MP3 is played.70
The track has the MP3 track name extension while it is not an MP3.
Do not use the ".MP3" extension in non-MP3.
? Takes time before the unit starts playing MP3.71
The medium contains many albums, tracks, and hierarchical levels.
The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
? Fails to play MP3 in the intended order.72
The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
? The sound skips when an MP3 is being played.73-1
The media is scratched or dirty.
Clean the media, referring to the section on <Disc cleaning>
(page 6).
The recording condition is bad.73-2
Record the media again or use another media.
? Can’t enter Folder Select mode.76
There’s no folder recorded in the MP3 media.
Use a media with levels.
? The songs in the selected folder aren’t played in Folder Select
mode.77
There are no MP3 in the selected folder.
Make sure there’s recorded content in the MP3 media.
? The MP3 track/disc search takes time.78
Many tracks are recorded on the media.
When the media directory is complex, the track/disc search can
take time.
KDV-C810_U.S_r02 02.12.16 12:53 PM Page 37