Filter
Top Products
In Tuner source
Upper Part Display
Information Display
Band display & Station name "Band+ch+SNPS"
Band display & Frequency "Band+ch+FREQ"
Lower Part Display
Information Display
Spectrum Analyzer & Graphic "S/ANA+GRAPHIC"
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Spectrum Analyzer "S/ANA"
Date "DATE"
Clock & Graphic "CLOCK+GRAPHIC"
For Disc name registration refer to <Station/Disc Naming
(SNPS/DNPS)> (page 14).
Switching the upper and lower part display.
1 Select the Display Type
Press the [DISP] button.
2 Enter Display Control mode
Press the [S.A] button.
"Display Control Mode On" is displayed.
3 Switch the Upper part display
Press the [FM] or [AM] button.
Switching Upper and Lower Part Display
Switching the information displayed in Standby.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Switch the display
Press the [S.A] button.
Each time the button is pressed the display switches as shown
below.
Information Display
Demonstration
Date & Clock
Standby display "ALL OFF"
• Demonstration can be selected when "Display Type A" is selected
in <Display Mode Switching> (page 11).
• Only "Display Type A" and "Display Type B" can be selected in "ALL
OFF".
Switching the Standby Display
General features
— 12 —
English
Switch the Lower part display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.
4 Exit Display Control mode
Press the [S.A] button.
• The same information can't be displayed on the Upper part
display and lower part display.
• The Upper part display and Lower part display switching can be
selected when "Display Type A" is selected in <Display Mode
Switching> (page 11).
• When "Display Type B" is selected the Lower part display
content is clock ON or OFF.
KDC-Z838/Z737_U.S_r2 02.11.15 10:07 AM Page 12