Filter
Top Products
Function of the KDC-Z838
Fine-tuning so that the System Q value is optimal when setting
the speaker and woofer type.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker & Woofer Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3 Select the Setting mode
Press the [FM] or [AM] button.
Each time the button is pressed it switches between Speaker
setting mode and Woofer setting mode.
4 Select the Speaker and Woofer type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker & Woofer Setting
3 Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Display
OFF "OFF"
For 5 & 4 in. speaker "5/4 inch"
For 6 & 6x9 in. speaker "6
*
9/6 inch"
For the OEM speaker "O.E.M."
4 Exit Speaker Setting mode
Press the [Q] button.
Function of the KDC-Z737
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
Speaker Setting
General features
— 10 —
English
You can recall the best sound setting preset for different types of
the music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting Display
Flat "FLAT"
User memory "User Preset"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
• User memory: The values set on the <Audio Control> (page 9).
• Each setting value is changed on the <Speaker & Woofer Setting>
(page 10) or <Speaker Setting> (page 10). First, select the Speaker
and Woofer type with the <Speaker & Woofer Setting> or
<Speaker Setting>.
System Q
KDC-Z838/Z737_U.S_r2 02.11.15 10:07 AM Page 10