Kenwood KDC-X589 CD Player User Manual


 
28
|
English
Menu system
Function of the KDC-X589
In CD mode
ACDrive firmware version display
Displaying the firmware version with the ACDrive
function.
1 Select the firmware version display mode
Push the Control knob to [FM] or [AM].
Select the "ACD VER" display.
2 Display the ACDrive firmware version
Push the Control knob to [4] or [¢].
Function of the KDC-X589
In CD mode
Unique ID display
Displaying the serial number for each product.
1 Select the unique ID display mode
Push the Control knob to [FM] or [AM].
Select the "ACD ID" display.
2 Display the unique ID
Push the Control knob to [4] or [¢].
Audio Preset Memory
Registering the value setup by Sound Control. The
memory can't be erased by the Reset button.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 10)
- <Audio Setup> (page 11)
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "A-PRESET" display.
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
5 Select the Audio Preset Memory
Push the Contol knob to [FM] or [AM].
Select the "MEMORY" display.
6 Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "MEMORY" display blinks 1 time.
7 Exit Menu mode
Press the [MENU] button.
• Register 1 pair of Audio Preset Memory. You can't
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items can't be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Function of the KDC-X589
Function of ACDrive disc
Voice Index
Setting the announcement during the play of
ACDrive disc.
Display Setting
"V-ID ON" Guide is announced.
"V-ID OFF" Not be announced.