Kenwood KDC-X815 CD Player User Manual


 
You can help prevent theft of the unit by reversing the
faceplate so that the control panel cannot be seen, hiding the
unit, and shutting off the audio.
Power ON/OFF:
When you turn your vehicle's ignition on, the unit's power will
also turn on, with the faceplate reversing to show the control
panel.
When you turn your vehicle's ignition off, the faceplate will
reverse to hide the control panel after a period of time which
you have set in the "Time setting for removing the faceplate" in
the menu. The unit's power will turn off.
Alternatively, you can remove the faceplate during that period.
For details, refer to the "Removing the faceplate" (page 14).
When the moving faceplate is hit by an object, it will stop and
return to its original state. Remove the object and repeat the
action.
The status of the security code Function (page.36) is display
whenever the power is switched on.
"CODE ON" (Security code has been registered)
"CODE OFF" (Security code has not been registered)
Using the Unit in Vehicles with Covered Consoles
Make sure the console is uncovered while the faceplate is
reversed.
Do not exert any excess force on the movable parts of the unit,
including the faceplate, as it can cause failure in the unit’s
mechanism.
2CAUTION
NOTE
Power
General features
— 7 —
SRC/
PWR OFF
EJECT
4/¢
ATT/
LOUD
FM
u/d
CLK/
D.M
AUD AM/
NF
DISP/
NAME.S
#1-6
LOUD indicator
Full-screen display mode
Vertical division display mode
Horizontal division display mode
KDC-X915_U.S_r4 00.12.26 3:53 PM Page 7