Kenwood KDC-X815 CD Player User Manual


 
CD/External disc control features
30
English
• During horizontal division mode
This function cannot be operated while the Black Mask
function is on.
• During the full-screen display mode
The display is switched each time the CLK button is pressed.
For information regarding the display items, refer to "Switching
Display" (page 12).
You can give names to discs through the presetting disc name
function (see p. 28).
Note that depending on the unit, display may not be possible.
If you try to display the name of a disc that doesn't have one,
"NO NAME" is displayed instead.
When an attempt is made to display the title of a disc for which
a disc title/track title has not been recorded, the CD will display
"NO TEXT" , the MD player built into this unit will display "NO
TITLE" , and an MD changer will display "NO TITLE/NO NAME".
Depending on the type of characters of the CD Text, some
characters may not be displayable.
NOTE
NOTE
NOTE
Track number
Track Time
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
DNPS
Track Time
Track number
DNPS
DISP buttonCLK button
Right side displayLeft side display
Switch the display that appears while discs are playing.
Switching Display for Discs:
Each time you press the DISP or CLK button, the display
during disc play switches as follows:
• During vertical division mode display
The same items cannot be selected for both the upper part
and the lower part.
When the Black Mask function is turned on, the lower part
display shows the clock only.
NOTE
Spectrum Analyzer1
Spectrum Analyzer2
+ Clock
Spectrum Analyzer2
+ Graphic
Graphic + Clock
Date
DNPS
Track Time
Disc Title
Track Title
DNPS
Disc Title
Track Title
DISP button CLK button
Upper part display Lower part display
Switching Display for Discs
KDC-X915_U.S_r4 00.12.26 3:53 PM Page 30