Filter
Top Products
56
|
English
Connecting Wires to Terminals
ANT.
CONT
MUTE
P.CONT
FRONT • L
FRONT • R
REAR • L
REAR • R
–
+
FRONT
SUB
WOOFER
AUX IN
REMO.CONT
REAR
FM/AM antenna input
Front left output (White)
Front right output (Red)
Fuse (10A)
Wiring harness
(Accessory1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
If no connections are made, do not let the wire come out from the tab.
Rear left output (White)
Rear right output (Red)
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Dimmer control wire (Orange / White)
When using the optional power amplifier, connect to its power
control terminal.
To car light control switch
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal
for the booster amplifier of the film-type antenna.
AUX left input (White)
AUX right input (Red)
External amplifier control wire
(Pink/Black) (KDC-X790 only)
To "EXT.AMP.CONT." terminal of the amplifier having the external
amp control function.
Sub Woofer left output (White)
Sub Woofer right output (Red)
To connect the Kenwood navigation system, consult your
navigation manual.
TEL mute wire (Brown)
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
To connect these leads, refer to the
relevant instruction manuals.
To Kenwood disc changer/
External optional accessory
To use the steering wheel remote control
feature, you need to an exclusive remote
adapter (not supplied) matches your car
is required.
Steering remote control
(Light Blue/Yellow)
(KDC-X790 only)