Filter
Top Products
Tuner features
— 9 —
AM
CRSC
FM/
AUTO/
AME
#1 - 6SRC
¢4
KDC-4023/KDC-3023/KDC-2023
KDC-1023/KDC-1023S
ST indicator
Band display
Preset station number
Frequency display
AUTO indicator
ST indicator
Band display
Preset station number
Frequency display
AUTO indicator
CRSC indicator
CRSC indicator
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUnE" display.
2 Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3 Tune up or down band
Press the [4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.
Tuning
Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode Display Operation
Auto seek "AUTO 1" Automatic search for a station.
indicator
Preset station "AUTO 2" Search in order of the stations
seek indicator in the Preset memory.
Manual — Normal manual tuning control.
Tuning Mode
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, the "CRSC" indicator is ON.
CRSC (Clean Reception System Circuit)
KDC-4023_U.S 02.9.26 3:09 PM Page 9