Kenwood KDC-116S CD Player User Manual


 
33
FM tuner section
Frequency range (200 kHz space) ............87.9 MHz 107.9 MHz
Usable sensitivity (S/N = 30dB) ....................9.3dBf (0.8 µV/75 )
Quieting Sensitivity (S/N = 50dB) ...............15.2dBf (1.6 µV/75 )
Frequency response (±3.0 dB)..............................30 Hz 15 kHz
Signal to Noise ratio (MONO)..............................................70 dB
Selectivity (±400 kHz).......................................................80 dB
Stereo separation (1 kHz) ....................................................40 dB
AM tuner section
Frequency range (10 kHz space) ...................530 kHz 1700 kHz
Usable sensitivity (S/N = 20dB) .............................28 dBµ (25 µV)
CD player section
Laser diode ....................................................GaAlAs (λ=780 nm)
Digital filter (D/A) .....................................8 Times Over Sampling
D/A Converter .......................................................................1 Bit
Spindle speed ..............................................500 200 rpm (CLV)
Wow & Flutter........................................Below Measurable Limit
Frequency response (±1 dB).................................10 Hz 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio (1 kHz) ................................................96 dB
Dynamic range ....................................................................93 dB
Channel separation..............................................................85 dB
Audio section
Maximum output power.................................................45 W × 4
Full Bandwidth Power (at less than 1% THD) ................22 W × 4
Tone action
Bass : ..........................................................100 Hz ±10 dB
Middle : .........................................................1 kHz ±10 dB
Treble : ........................................................10 kHz ±10 dB
Preout level / Load (during disc play)....................1800 mV/10 k
Preout impedance............................................................ 600
General
Operating voltage (11 16V allowable) ..............................14.4 V
Current consumption.............................................................10 A
Installation Size (W x H x D) ..........................182 × 53 × 157 mm
7-3/16 × 2-1/16 × 6-3/16 in.
Weight.................................................................3.31 lbs (1.5 kg)
Specifications subject to change without notice.
Specifications
KDC-416S(K)_U.S_ver2.0 00.12.26 0:58 PM Page 33