Kenwood KDC-116S CD Player User Manual


 
4/¢ buttons
Press the 4 button to search through the tracks backward.
Press the ¢ button to search through the tracks forward.
DISC buttons (for disc changers)
Press the DISC
button to search through the discs backward.
Press the DISC
+ button to search through the discs forward.
38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
CD/External disc control features
4/¢ (TUNE) buttons
Press the 4 button to decrease the frequency.
Press the ¢ button to increase the frequency.
AM/FM buttons
Press the AM button to select the AM band.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
Tuner features
VOLUME buttons
Press the + button to turn the volume up.
Press the
button to turn the volume down.
SRC button
Each time you press the SRC button, the mode switches as
follows:
The mode switches to the next mode from any mode which
cannot be used.
The external disc control mode will differ depending on the unit
that is connected.
To enable the selection of External disc control mode 2/AUX
mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
During the AUX mode, "AVin" will show in the display.
When the CA-C1AX is being used, the AUX Mode will replace
the External Disc Control Mode.
ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
NOTE
Tuner mode
CD mode
External disc control mode 1
External disc control mode 2 / AUX mode
Standby mode
Basic operations
Accessory of the KDC-316V
Basic Operations of remote
24
English
KDC-416S(K)_U.S_ver2.0 00.12.26 0:58 PM Page 24