Filter
Top Products
17
EN
Clock/timer operation
8 Press program button (PROGRAM button on
the remote control).
9 Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to se-
lect the desired source and press program
button (PROGRAM button on the remote con-
trol) to store the setting.
The source switches as follows :
“CD” → “TUNER” → “TAPE” → “REC TU”
(recording tuner)
0 Press timer set button (TIMER SET button
on the remote control).
The icon “TIMER” will flash and the volume
display will appear.
! Press program button (PROGRAM button on
the remote control).
@ Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to set
volume level and press program button (PRO-
GRAM button on the remote control) to store
the setting.
# Press timer set button (TIMER SET button
on the remote control).
$ Press timer on/off button (TIMER ON/OFF
button on the remote control) to activate timer
mode.
The icon “TIMER” changes from flashing to
steadily lit.
The timer is now set.
% Switch the system to standby mode.
When reached the preset timer, the selected
source will play or switch to standby mode if
the timer has been activated.
To activate / deactivate the timer
Press timer on/off button (TIMER ON/OFF but-
ton on the remote control). If activated, the icon
“TIMER” will appear on the display.
Notes:
•The timer off will not be activated if the starting and
stopping time are the same.
• If the selected source (“CD”, “TAPE” or “REC TU”)
is not available when preset timer is reached, TUNER
will be selected automatically.
• During timer setting, if no button is press within 7
seconds, the system will exit timer setting mode
automatically.
Sleep timer setting
If the sleep timer is activated, the system will
switch to standby mode after the selected time
has expired.
Each press of the SLEEP button on the remote
control decreases the timer period by 10 minutes.
The sleep timer can be set up to 90 minutes.
The display will change to sleep time display and
change as follows:
90 min - 80 min -70 min - 60 min - 50 min - 40 min
- 30 min - 20 min - 10 min - OFF - 90 min - 80 min...
The icon “SLEEP” will appear on the display.
While sleep mode is in active:
To deactivate the sleep timer
Press SLEEP button on the remote control or press
the
button to turn the power off.
Note:
If timer off and the sleep off are all activated, the sys-
tem will switch to standby mode by the earlier timer
set.
*5469/08-20/EN 04.6.1, 11:20 AM17