Kenwood HM-537MP Stereo System User Manual


 
14
EN
Using the radio
4 Press PTY button on the remote control to
select your desired program type.
Program type table
Program Type Name Display
News NEWS
Current Affairs AFFAIRS
Information INFO
Sport SPORT
Education EDUCATE
Drama DRAMA
Culture CULTURE
Science SCIENCE
Varied Speech VARIED
Pop Music POP M
Rock Music ROCK M
Easy Music EASY M
Light Classical Music LIGHT M
Serious Classical Music CLASSICS
Other Music OTHER M
Weather WEATHER
Finance FINANCE
Children’s Program CHILDREN
Social Affairs SOCIAL
Religion RELIGION
Phone In PHONE IN
Travel TRAVEL
Leisure LEISURE
Jazz Music JAZZ
Country Music COUNTRY
National Music NATION M
Oldies Music OLDIES
Folk Music FOLK M
Documentary DOCUMENT
5 Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to start
searching.
Notes:
Under certain receiving conditions, it may take more
than 1 minute to complete the search.
If the desired program type cannot be found, “NO
MATCH” is displayed, then after several seconds
the display returns to the original display.
Using the cassette
Playing a cassette tape
1 Press TAPE mode button (TAPE/MODE but-
ton on the remote control) to TAPE.
2 Press push open button to open the cassette
compartment door.
3 Insert cassette tape into the compartment with
the open edge facing down.
4 Close the door securely.
5 Press TAPE mode button (TAPE/MODE but-
ton on the remote control) to select the de-
sired reverse mode.
icon : plays only one side of the tape
and stops.
icon : plays both side and stops.
icon : plays both side endlessly.
6 Press 4 or ¢ button to move tape to the
desired starting point.
7 Press 6 or
button to select the tape run-
ning direction and begin playing the tape.
8 Turn volume knob (press VOLUME UP or
DOWN button on the remote control) and press
EQ/X-bass button (EQ/X-BASS on the remote
control) to desired listening level.
Recording on a cassette tape
You can record from the radio or the CD player.
For best recording, use a normal bias tape (Type 1
only).
Recording from the radio
1 Insert a cassette tape into the tape compart-
ment and close door.
2 Press TUNER band button (TUNER/BAND
button on the remote control) to TUNER and
select a radio station.
3 Press rec button (REC button on the remote
control) to set the unit into recording standby
mode.
The icon “REC.” appears on the display.
*5469/08-20/EN 04.6.1, 11:20 AM14