Filter
Top Products
15
EN
ENGLISH
Using the cassette
Radio recording tip
•To temporarily pause the recording, press rec
button (REC/DEMO button on the remote con-
trol). Press 6 button (6 PLAY/PAUSE but-
ton on the remote control) to resume record-
ing.
Recording from a CD/MP3-CD
1 Insert a blank cassette tape into the tape deck.
2 Press CD button to CD.
3 Insert a CD/MP3-CD and make sure that the
unit is in stop mode.
4 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to select the first track you want to record.
5 Press rec button (REC/DEMO button on the
remote control) to set the unit into recording
standby mode.
The icon “REC.” appears on the display.
6 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin recording.
Press rec button (REC/DEMO button on the
remote control) to interrupt recording. Press
6 button (6 PLAY/PAUSE button on the
remote control) to resume recording.
7 Press 7 button to end recording.
Notes:
•To ensure good system performance, wait until the
unit completely reads the disc before recording.
• During recording, it is not possible to listen to an-
other source.
Program recording from a CD/MP3-CD
Desired CD tracks/MP3 files can be programmed
in the desired sequence and recorded onto a tape.
1 Insert a blank cassette tape into the tape deck.
2 Press CD button to CD.
3 Insert a CD/MP3-CD and make sure that the
unit is in stop mode.
4 Program the desired sequence of CD tracks/
MP3 files.
See page 10 for programming procedure.
5 Press rec button (REC/DEMO button on the
remote control) to set the unit into recording
standby mode.
The icon “REC.” appears on the display.
6 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin recording.
7 Press 7 button to end recording.
04.6.30, 3:22 PM15