Filter
Top Products
10
EN
ENGLISH
To search a desired file by file name
1 Press FILE SEARCH button on the remote
control.
2 Press the digit buttons to enter the first char-
acter of the file name you wish to search and
press ENTER button.
Repeat this procedure to enter the rest of the
file name.
3 Press FILE SEARCH button on the remote
control.
The icon “FILE SEARCH” will appear on the
display.
If the unit finds an appropriate file, the file name
will be scrolled on the display.
If there is no appropriate file, “NO FILE” will
be appeared.
4 Press 6 button (6 PLAY/PAUSE button on
the remote control) to start playback.
Programming tracks
Programming tracks of a disc is possible when
playback is stopped. Up to 60 tracks can be stored
in the memory in any order.
1 In stop mode, press program button on the
unit (PROGRAM button on the remote control)
to enter program setting.
The icon “PROGRAM” and “– – P–01” will
appear on the display. “– –” indicates track
number of the CD and “P–01” indicates pro-
gram number.
2 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to select the desired track.
The digit buttons (0~9) on the remote control
can also be used to select tracks.
The icon “PROGRAM” and program number
will start flashing.
3 Press program button on the unit ( PROGRAM
button on the remote control) to store the se-
lected track.
The track number returns to “– –” and the next
program number will appear on the display.
4 Repeat steps 2 to 3 to select and store other
desired tracks in this way.
The icon “PROGRAM” will appear on the dis-
play and “FULL” will start flashing if you attempt
to program more than 60 tracks.
Press program button on the unit ( PROGRAM
button on the remote control) in stop mode to
review the program sequence.
5 Press 6 button (6 PLAY/PAUSE button on
the remote control) to play the programmed
tracks.
If you press repeat button on the unit (REPEAT
button on the remote control) during pro-
grammed playback, the current track or all pro-
grammed tracks will be played repeatedly.
The icon “REPEAT” or “REPEAT ALL” and the
icon “PROGRAM” will appear on the display.
6 Press 7 button once to stop program playback
or twice to clear the program.
The icon “PROGRAM” will disappear from the
display.
Programming files
(For MP3-CD only)
Programming files of a disc is possible when play-
back is stopped. Up to 60 files can be stored in
the memory in any order.
1 In stop mode, press program button on the
unit (PROGRAM button on the remote control)
to enter program setting.
The icon “PROGRAM” and “– – – P–01” will
appear on the display. “– – –” indicates file
number of the MP3-CD and “P–01” indicates
program number.
Using the CD/MP3-CD
04.6.30, 3:21 PM10