Filter
Top Products
Preparations
English
15
Loading batteriesLoading batteries
1 Remove the cover.
2 Insert batteries.
• Insert two R03 batteries following the polarity indications.
3 Close the cover.
Operation Operation
Plug the power cord of the system to a power outlet and press
the power key on the remote control unit to turn the system
ON. After the system is switched ON, press the desired opera-
tion key.
• When pressing more than one remote control keys in sequence,
leave a period of about 1 second or more between each press.
• The provided batteries are intended for use in checking opera-
tions and their life may be shorter than usual.
• When the remote controllable distance becomes short, replace
both of the batteries with new ones.
• The system may malfunction if the remote control sensor is ex-
posed to direct sunlight or the light of a fluorescent lamp with
high-frequency lighting system (inverter system, etc.). In this
case, change the system installation to prevent malfunction.
Remote sensor
6 m (approx.)
8
REPEAT key (See page 24.)
Repeats playback.
A-B key (See page 25.)
Repeats sequence from point A to point B.
9
MARKER key (See page 27.)
Marks any point during playback.
SEARCH key (See page 27.)
Displays Marker Search menu.
0
OPEN/CLOSE
0
key (See page 23.)
Opens or closes the disc tray.
!
MENU key (See page 23.)
Accesses menu on a DVD disc.
@
ON SCREEN key (See page 22.)
Accesses On-Screen display.
#
4
,
¢
keys (See page 24.)
Skips or searches (by fast forward or fast reverse) a chapter
or track.
£
key
(See page 23.)
Starts playback.
$
P. MODE key (See page 25.)
Enter the program edit mode.
%
CLEAR key (See pages 26, 27.)
Removes a track number on the Program List or a mark on
the Marker Search menu.
^
ANGLE key (See page 28.)
Selects a DVD camera angle.
SETUP key (See page 16.)
Accesses or removes the Setup menu.
&
RANDOM key (See page 30.)
Plays tracks in random order.