Filter
Top Products
6
|
DPX-MP6110U
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set”/
“Security Clear”
1 sec.
Sets/Resets security code
15
“SRC Select” “1”*/ “2”
Sets the source selection method.
24
“iPod Mode” “OFF”/ “ON”*
When set to “ON”, allows you to select music in the manner
similar to that of the iPod.
12
“AT COL CHG” “OFF”/ “iPod”*
When the iPod source is used, sets whether the illumination
color is changed by the iPod.
24
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec.
Sets the clock.
—16
“Date Adjust”
1 sec.
Sets the date.
16
“Date Mode” 7 types 1 sec.
Sets the date display mode.
“DSI” “OFF”/ “ON”*
A red indicator will blink on the unit after the ACC is set to
OFF, warning potential thieves.
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed.
—24
“Dimmer” “OFF”/ “ON”*
Dims the display part in conjunction with the light switch
of the vehicle.
“ILM Dimmer” “AUTO”*/ “MNAL”/
“OFF”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
24
“ILM Effect” “OFF”/ “ON”*
Sets whether the illumination color is changed in
conjunction with the key operation. (To connect the
Bluetooth unit)
“ILM MSC SYNC” “OFF”*/ “ON”
Sets whether the key illumination color is changed in
conjunction with the sound volume.
—
“SWPRE” “Rear”*/ “Sub-W”
Sets the preout output.
24
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
24
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
24
“Supreme” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
24
“AMS Control”
1 sec.
Controls the connected LX amplifier.
—16
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception is
poor.
“Name Set” 1 sec.
Sets the station name (SNPS)/ disc name (DNPS)/ AUX name.
10/11
“Chinese” “OFF”*/ “ON”
Selects Chinese as the display language.
24
“Scroll” “Auto”*/ “Manual”
Specifies whether the text is scrolled automatically.
—
“Built in AUX” “OFF”/ “ON”*
Sets whether to display AUX during source selection.
“CD Read” “1”*/ “2”
Sets the CD read mode.
25
“DISP REVERSE”
“POSI 1”/ “POSI 2”/
“NEGA 1”*/ “NEGA 2”
Switches the panel display between positive or negative.
—25
“CONTRAST” “1” – “10”
Adjusting the display contrast.
—
“OPENING MSGE
Edit”
1 sec.
Sets the opening message displayed when the power is
turned on.
11
“DEMO Mode” “OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—16
SOUND “S-SET” “CABIN” “Compact1” etc.
Selects the car type to compensate the distance difference
between each speaker.
17/25
“DTA”
Makes fine adjustment of the compensation value specified
at Cabin.
17/25
“XOVER”
Makes fine adjustment of the X’Over value specified at
Speaker.
18
Function Control
Functions in the table below can be set up by using Function Control.