Filter
Top Products
English
|
21
Function of remote control
Direct TV Tuning
Entering the TV channel and tuning.
1 Enter Direct TV Tuning mode
Press the [DIRECT] button on the remote
control.
“– –” is displayed.
2 Enter the TV channel
Press the number buttons on the remote
control.
Example:
Desired channel Press button
8 ch [0], [8]
Cancelling Direct TV Tuning
Press the [DIRECT] button on the remote
control.
Preset Tuning
Recalling the TV channels in the memory.
1 Enter Preset Tuning Select mode
Turn the Control knob.
A list is displayed.
2 Select a desired station in the memory
Turn the Control knob.
3 Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
⁄
• This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button for at least 2 seconds.
Preset Memory
Putting the TV channels in the memory.
1 Select the TV channel to put in the memory
Push the Control knob towards right or left.
2 Enter Preset Memory mode
Select “P.MEM”.
For how to select Function Control item, refer to
<Function Control> (page 6).
3 Select the number to put in the memory
Turn the Control knob.
4 Determine the number to put in the memory
Press the Control knob.
5 Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
⁄
• This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button for at least 2 seconds.
Basic Operation
Selecting TV source
Press the [SRC] button.
Select the “TV” display.
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
Select the TV band and Video input
Push the Control knob toward up.
Each time you push the knob, TV bands and Video
input alternate.
Select the TV channel
Push the Control knob towards right or left.
Preset Memory
Press the desired [1] — [6] button for at least 2
seconds.
Preset Tuning
Press the desired [1] — [6] button.
TV control (Optional)