Kenwood DP-4090 CD Player User Manual


 
DP-5090/4090 (En)
16
To repeat the entire disc
1
Program desired tracks.
Repeated playback
÷All of the programmed tracks will be repeated.
÷In case only one track is programmed, only that track will be repeated.
÷Up to 32 tracks can be programmed. When
FULL is displayed, no
more tracks can be programmed.
(Perform steps 1 and 2 on page 14.)
To repeat only the programmed tracks
: Keys and control used in the operations described on this page.
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
GP0M1 NT.O??
EREPTAON
GP0M1
10
\
EREPTAON
REPEAT
2
Switch REPEAT ON.
REMOTE CONTROL UNIT
RC-P0505
The current status is displayed when the
key is pressed once.
When it is pressed while the status is
displayed, the repeat ON status can be set
to OFF (or vice versa).
3
Start playback.
6
REMOTE CONTROL UNIT
RC-P0505
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON OFF)
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON OFF)
1
Press so that the “PGM” indicator
goes off.
P.MODE
REMOTE CONTROL UNIT
RC-P0505
2
Switch REPEAT ON.
REPEAT
3
Start playback.
REMOTE CONTROL UNIT
RC-P0505
REMOTE CONTROL UNIT
RC-P0505
6
Preparation
÷Load a disc in the CD player.
The current status is displayed when the
key is pressed once.
When it is pressed while the status is
displayed, the repeat ON status can be set
to OFF (or vice versa).