Filter
Top Products
DP-5090/4090 (En)
14
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
÷ Load a disc in the CD player.
Press so that the “PGM” indicator lights.
Program desired tracks.
1
2
2 Set the entry.
1 Select the desired track No.
Press the numeric keys as shown below....
To enter track No. 25: 005
Preparation
Go to step 2 within 8 seconds.
: Keys and control used in the operations described on this page.
REMOTE CONTROL UNIT
RC-P0505
REMOTE CONTROL UNIT
RC-P0505
GP0M1 NT.O??
Blinks.
12
3
45
6
78
9
0 +10
÷The programmed contents remain in memory.
To stop playback
7
Start playback.
3
REMOTE CONTROL UNIT
RC-P0505
3 Repeat steps 1 and 2 above.
P.MODE
REMOTE CONTROL UNIT
RC-P0505
REMOTE CONTROL UNIT
RC-P0505
6
GP0M1 NT.O52AB
«
GP0M1 BADCFEHG
GP0M1 NT.O52
÷When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
÷When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
P.MODE
÷Tracks can also be selected by pressing the 4 or ¢ key.
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷When the total playing time of the programmed tracks exceeds 100
minutes, the remaining time on the disc will not be displayed any more.
Do this operation in the stop mode.
In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
REMOTE CONTROL UNIT
RC-P0505
COMPACT DISC PLAYER DP-5090