Kenwood CT/KXF-W Cassette Player User Manual


 
CT-2050/203/KXF-W6010/W4010 (En/M)
24
Timer operations
3
4
Set the TIMER switch to REC.
Set the amplifier volume to the minimum position.
÷Refer to the "How to use the MPX FILTER key". &
÷To cancel, press the MPX FILTER key again.
Timer relay recording (CT-2050/KXF-W6010 only)
÷Set the desired time when the recording is to be started.
÷When the set time comes, the powers of the related components are
turned ON and recording starts.
÷Recording stops when the end of side to be recorded is reached.
÷Read carefully the instruction manual of your audio timer.
5
Set the timer.
2
Adjust the recording level.
1
Press the MPX FILTER key to ON.
Preparation
Timer recording of tuner broadcast (CT-203/KXF-W4010; Deck B only)
1
Set the power switches of the compo-
nents to ON.
2
Set the input selector of the amplifier to
TUNER.
3
Receive the desired radio station with
the tuner.
4
Make "Playback (recording) preparation".
0
(If relay recording is required, insert tapes
in both decks A and B.)
5
(Remove the disc from the CD player.)
÷While pressing the PAUSE (8) key, press the REC/ARM () key.
÷Refer to the "How to record".
^
÷Relay recording is not set, deck B will record.
1. To ensure that the cassette deck’s automatic shut off switch operates before the power is shut off, set the timer so that it operates for a little
longer than the playing time of the tape.
2. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.)
MPX FILTER
8
PAUSE
REC/ARM
TIMER
REC OFF PLAY
Notes
Notes
1
Set the record-pause mode.
2
Adjust the recording balance and
recording level.
CT-2050/KXF-W6010
CT-203/KXF-W4010
1
Press the MPX FILTER key to ON.
&
2
Complete the procedure 1, 2, 3 of
"Relay recording".
(
3
Complete the procedure 3, 4, 5 of
"Timer recording of tuner broadcast".
"MPX" lights up.
: Keys and control used in the operations described on this page.
CT-2050/KXF-W6010 only
(when recording FM broadcasts only)